艾科艾门ACO·AMEN化学个有下油墨有限公司

ALABINE SVB Series Inks

(特种塑料专用油墨)

         ALABINE SVB series inks, which prepared with special mixed-resin, extra fine fillers and pigments, and so on, are not only feeling fine and smooth, but also of good leveling and printability. The after-treatment on the presswork is feasible, such as punching, drilling, cutting, etc. The film is alcohol resistant， chemical resistant and sterilization resistant.

         ALABINE SVB系列油墨由特种树脂、超细颜填料等配制而成。该产品色彩细腻，流平性和印刷性非常优秀，后加工适应性也特别理想，如冲压、钻孔、切割等；涂膜耐酒精耐化学溶剂耐蒸煮。

◆ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, etc.

◆ Recommended for: Windows screens, the phone keypad, the phone shell, etc.

◇ 适用基材：加硬PC，加硬PMMA，UV漆面，电镀面等

◇ 推荐用途：视窗屏，手机按键，手机壳等

         Prepare: To clean the surface with ALATIVE SC5 treater and make sure non-dust, non-grease. To dilute the Ink with 3-20% ALATIVE SR6 thinner（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SA5 (10-15%, to total) activator completely and then is ready.

         Mesh count: 70T to 180T

         Drying: Air dry in 12-18 hours, or forced dry at 80 ^OC in about 40 minutes.

         Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.

         印前：用ALATIVE SC5清洗印件表面，确定无尘、无油脂；用3-20%的ALATIVE SR8将产品稀释至需要稠度（调节油墨干燥速度，可以配合适量的ALATIVE RR6或ALATIVE SF3），添加10-15%（对总量）ALATIVE SA5活化剂，与油墨充分混合；即可印刷。

         网纱：70T至180T

         干燥：自然风干，12至18小时；或80^OC烘干，约40分钟。

         清洗：用ALATIVE SC6清除污点和不良印刷；用ALATIVE CC6清洗网板。

         Color: More than 20 kinds of colors for selection and with professional mixed-color service.

         Packaging: 1kg/can, 5kg/barrel, 20kg/barrel

         颜色：二十多种颜色供选择，并专业调色

         包装：1千克/罐；5千克/桶；20千克/桶